Early-stage startup Noctiluca to commercialize new TADF OLED compounds

A new company has recently been launched in Poland, to commercialize a new family of TADF OLED compounds. Noctiluca, which takes its name from a bio-luminescent marine creature, was established a few months ago with aims to be the world's first company to produce a commercial-ready blue TADF emitter.

Noctiluca Synthex materials photo

Noctiluca's story begins with an innovative organic DSSC solar cell platform that was developed at Synthex, an organic chemistry development platform company based in Toruń, Poland. A few years ago the researchers turned their attention to light emitting materials (which are quite similar to the light harvesting materials used in solar panels) and intensive research culminated in a promising family of new TADF compounds - which was then spun-off as Noctiluca,

Researchers from MPI-P propose a new way to design efficient OLED materials without unipolar charge transport

Researchers from the Max-Planck-Institute for Polymer Research (MPI-P) have built upon new understanding on organic electronic material defects to suggest ways to design higher efficiency OLED materials.

 Charges in organic semiconductors, trapped by oxygen and water molecules (MPI-P)

The researchers explain that they have discovered that clusters of water inside organic semiconductors can function as hole traps, and oxygen clusters can capture electrons in hole-dominated organic semiconductors. Even a small number of such water and oxygen defects can cause highly unipolar charge transport and harm the efficiency of the materials.

LG: our latest OLED TVs are much more entertaining than an LCD TV from 6 years ago

LG Electronics performed an interesting test comparing an OLED TV to an LCD LED TV to analyse the physical and emotional responses of viewers. The test was done on identical twins in the UK (Henry and William Wade), which viewed a Game of Thrones episode on LG's OLEDE9 TV and an 2013 LG LCD LED TV.

LG used Realeye's AI platform to analyse the facial expressions, head movements and body language of the twins, in addition to their hear rate. LG says that the test revealed that its OLED TV held 25% more attention than its 2013 TV, and that happiness was three times higher. The LG OLED TV provided a 15% more intense experience from a positive emotional standpoint.

Researchers use perovskites to create efficient and cost-effective thick OLED devices

Researchers from Japan's Kyushu University developed new OLED devices made by integrating OLED emitters with thick layers of hybrid perovskite materials. The researchers say that such a device structure to enable lower-cost production and better viewing angles in OLED displays.

A test organic light-emitting diode (OLED) incorporating thick layers of hybrid perovskite emits green light image

OLED devices usually use a very thin layer of organic materials, as these are poor conductors, which makes production more difficult and also leads to cavity effects which distorts the emission color. The thick perovskite-OLED hybrid layer (which is around 2,000 nm thick) are more easily processed compared to thin film layers while still being highly conductive.

Researchers use reactive ion etching to create nanostructures that boost the efficiency of white OLED devices

Researchers from TU Dresden developed a new method to extract trapped photos from OLED devices. The idea is to generate controllable nanostructures with directional randomness and dimensional order. This method is said to significantly boost the efficiency of white OLED devices. The researchers report that it is possible to achieve an external quantum efficiency of up to 76.3%.

Reactive ion etching for the generation of quasi-periodic nanostructures (TU Dresden)

To produce the nanostructures, the researchers use reactive ion etching, a facile, scalable and lithography-free method. In addition to these advantages, the method enables to specifically control the topography of the nanostructures by adjusting the process parameters.

Researchers develop a single-layer, efficient TADF OLED device

Researchers from the Max Planck Institute for Polymer Research (MPI-P) have developed an efficient OLED device that is comprised of a single organic material layer - replacing the normal stack of 5-7 layers in modern OLED devices.

Single-layer TADF OLED device (MPI)

The researchers managed to create this OLED device by using a TADF material (CzDBA, diboron based TADF) and by using a newly developed charge injection strategy. The OLED device features a low operating voltage (2.9V at 10,000 cd/m2, an EQE of 19% (at 500 cd/m2) and a lifetime of 1,880 hours at 50% (for 1,000 cd/m2). The color of the device is greenish-yellow.

Researchers develop PLED materials with circularly polarized luminescence

Researchers from the Imperial College London developed a new class of PLED materials that exhibit circularly polarized luminescence. Basically this means that the new materials emit polarized light which could make for more efficient Polymer-OLED devices as none of the light will be blocked by the external anti-glare circular polarizer added to the display.

Polarized eimssion from PLED materials (Imperial College London)

In 2013 researchers from the ICL has reported they are researching the usage of Helicenes as emitter materials in PLED devices that also emit circularly polarized light - the researchers termed these devices CP-OLED (Circularly-Polarized OLED). Helicenes materials are thermally-stable polycyclic aromatics with helically-shaped molecules.

The DoE grants $1.1 million to Penn State researchers and OLEDWorks to research low refractive index organic materials

The US Department of Energy (DoE) has granted $1.1 million to Penn State University professors Chris Giebink and Michael Hickner for a new project to increase the efficiency of OLED lighting panels.

The researchers, collaborating with OLEDWorks in this project (and previous ones as well), aim to find a way to lower the refractive index of the organic materials which will increase the external efficiency of OLED devices. The basic idea is to insert other molecules and blend them with the existing OLED materials which lower the refractive index without adversely affecting the properties of the original molecules.

Electron spin control enables triplet-only excition formation in OLEDs

Researchers from RIKEN, the University of California, San Diego and others have developed a new mechanism to enhance the efficiency of OLED devices. The basic idea is to manipulate the electron spin to control the OLED exciton formation - basically lowering the OLED voltage so that only triplets and formed instead of a combination of singlets and triplets.

PTCDA OLED spin research image (RIKEN)

The researchers demonstrated this principal using an organic molecule called 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA), placed on a metal-supported, ultrathin insulating film. By measuring the emission spectrum, they could monitor the exciton type - and show that at a low voltage, only triplets are formed.

The Holst Center to unveil new fingerprint sensor technologies at Display Week 2019

The Holst Centre announced that it will show several new fingerprint sensor innovations at Display Week 2019 next week. The research center will show a new high-resolution (500 PPI) under-the-display sensor that uses the Center's proprietary collimator technology as well as an in-display sensor concept that uses photolithography patterning to integrate the OLED and organic photo diodes (OPD) pixels side-by-side.

The Holst will also showcase a new over-the-display (suitable for LCDs) transparent sensor which at 70% the center says is the world's most transparent fingerprint sensor.